DUN

From Zaks Enterprises

LG VX9900

Step 1 Go to the following link. The very first post should be a link to QPST 2.7 build 215. You will have to register in order to download it. http://www.howardforums.com/forum/s...&highlight=QPST

Step 2 Download QPST 2.7 build 215 and install it.

Step 3 Connect your phone to your PC via usb cable or via bluetooth. There are plenty of tutorials on how to connect your phone to your computer. Please check the VX8100 HowTo as the process will be exactly the same.

Step 4 Launch the QPST Configuration Tool

[1] Add the port your phone is listening on. If your phone is capable, you can connect via bluetooth or simply use a USB cable, the choice is yours.

Be sure to specify the correct port.

If you are not sure what port your phone is connected to, try downloading BitPim and using the auto-detect feature to determine which port your phone is listening on.

You'll know that you've specified the correct port once the Configuration Tool has picked up your phone.

Step 5 Launch the Service Programming tool that is part of the QPST Suite.

Step 6 Connect to your phone with the Service Programmer. If you have completed the previous steps successfully, you will see your phone listed.

Step 7 Click the 'Phone' menu, then 'Read from Phone'. Wait for the Service Programmer to read the data from your phone. BEFORE making any changes, click 'Save to File' and BACKUP your qcn file. DO NOT SKIP THIS STEP!

Step 8 Once you have backed up your qcn file. Scroll to the 'M .IP' tab. Once there, select your entry from the list, and click 'Edit'.

Step 9 You must edit your 'Tethered NAI' so that your phone will use the same login information for both EVDO and CDMA-1X network access. If your mobile number is 1234567890 then your 'Tethered NAI' will read '1234567890@dun.vzw3g.com'. Change it so that it reads '1234567890@vzw3g.com'. Once complete, your 'NAI' and 'Tethered NAI' should be EXACTLY the same. Click 'OK'.

Step 10 Click 'Write to Phone' to write the modified qcn file to your phone.

Enjoy, your 'DUN'!

To use the EVDO DUN service, add an new dialup connect with the following credentials:

Phone Number: #777 Username: MobileNumber@vzw3g.com (ex: 1234567890@vzw3g.com) Password: verizon

Be sure to select your phone as the default modem for this connection.

Cheers, randyman

LG AX8300 (Glimmer)

I was having issues tether with my phone and gaming on XBL. It would constantly get pings times in the 1000's. So I change the Network Select Preference Mode to Digital Only - No Hybrid.

To do this go to the menu -- 0 -- 000000 - Network Select -- Mode Preference -- Digital Only Non Hybrid

You can also select HDR only which will only allow the phone to pick up EVDO signal.

After I did this my ping times were consistently in the 100s-200s.