MMS
From Zaks Enterprises
Contents |
MMS Setup
To send a message please put the phone number along with the carriers ending. The return address will show up as your phone number.
1. T-Mobile phonenumber@tmomail.net
2. Virgin Mobile phonenumber@vmobl.com
3. Cingular phonenumber@cingularme.com
4. Sprint phonenumber@messaging.sprintpcs.com
5. Verizon (MMS) phonenumber@vzwpix.com
6. Verizon (Text) phonenumber@vtext.com
7. Nextel phonenumber@messaging.nextel.com
8. US Cellular phonenumber@mms.uscc.net
9. AT&T phonenumber@txt.att.net
10.VoiceStream phonenumber@voicestream.net
NOTE: Cingular customers are being converted over to AT&T so, you most likely want to send MMS to @txt.att.net and if they don't get it; then try sending to @cingularme.com
Important Note: Always backup any information that you are changing. It's always better to be safe then sorry... Just write it down on a piece of paper, and don't loose it(if you don't think you can do this, then copy it into your notepad, or similar tool, on your phone). --SmokeyMP 20:41, 19 December 2007 (PST)
V3C/V3M (Verizon)
Before this will work you still have to flash your V3C/V3M with alltel firmware. Here is the guide. http://wiki.howardforums.com/index.php/Motorola_V3c_Tutorial:_Flashing_to_Alltel_User_Interface
1. Edit Seem 2742 0001 Offset 62. Turn bit 5 on to enable MMS Server List.
2. Edit Seem 2742 0001 Offset 6a. Turn bit 3 on to enable 1XRTT Data Menu.
3. Activate ZaksWap account with us by sending an email to freewap@zaksenterprises.com
4. Follow the setup instructions Main_Page#Motorola_RAZR_V3C.2FV3m, to setup phone for your ZaksWAP
5. Goto your Security Settings, goto 1XRTT Data
6. Type in your WAP user name and password for your ZaksWap
7. Test your OpenWave browser to make sure the proxy settings work
8. Goto your messages, options, inbox setup, MMS Setup, Server Info
9. Create or Edit a connection. Put http://www.zaksenterprises.com/humpa_mms/send.php in your MMS Server Address, use your ZaksWAP Proxy for your websession!!
10. Send a MMS to any email or Send to Online Photo Album.
Information provided by Humpa
Most LG's
1.You need LGDownload v1.3.6.3 (v1.6 didn't have the option ) the VX8300 DLL pack.
2. Open LGDownload, in the top right bar you will see a button labeled DLL next to a button labeled DLL with a check under it... first press the DLL with the Check Mark under it to enable user DLL selection.. then press the DLL button. Click the Tri Mode folder and select the VX8300 dll on the right (double click).
3. On the left in the Download Shortcut bar, click on NV Edit, and then click on NV Edit Start. It will prompt you for a code, it is 000000.
4. Go to the MMS tab
5. change the MMSC SERVER URL to http://www.zaksenterprises.com/humpa_mms/send.php
6. click WRITE
LG VX8300
1.You need LGDownload v1.3.6.3 (v1.6 didn't have the option ) the VX8300 DLL pack.
2. Open LGDownload, in the top right bar you will see a button labeled DLL next to a button labeled DLL with a check under it... first press the DLL with the Check Mark under it to enable user DLL selection.. then press the DLL button. Click the Tri Mode folder and select the VX8300 dll on the right (double click).
3. On the left in the Download Shortcut bar, click on NV Edit, and then click on NV Edit Start. It will prompt you for a code, it is 000000.
4. Go to the MMS tab
5. MMSC SERVER URL : http://www.zaksenterprises.com
6. MMSC POST URL : /humpa_mms/send.php
7. click WRITE
Motorola E815
Needed Items
1. USB Cable (see the FAQ)
2. Install the Motorola USB Modem drivers.
3. Install and run Motorola Software Update (https://rsd.motorola.com/download/Motorola_Software_Update.exe)
4. Install P2KSeem for V710. http://mark.cdmaforums.com/Files/P2KSeem4V710.zip (To install P2KSeem for V710.. Just unzip all the files in the archive you downloaded to a folder. It does not need to be "installed." There is no "setup" program.)
5. Make sure P2kSeem says connected
6. Read Record 1, Bytes (h) 0000 Seem 2742, Offset 62, Bit 5 - Enable editing of PIX servers - check to enable.
7. Menu>Messenging>Message Setup>Pix Message Setup>Server Info>Menu>Edit. Then: Service Name: "whatever you want" Server Name: http://www.zaksenterprises.com/humpa_mms/send.php Web Session: Choose your ZaksWap session.
8. Send a message to test.
Samsung D500
1. Go to Menu>Messages>Menu>Message Setup>MMS Sender Setup>Server Info
2. Press Menu>New
3. in Server Name put http://www.zaksenterprises.com/humpa_mms/send.php
Samsung a680
Follow the steps for the a930. Except when you get to step 6, Enter Lock Code: 680667 instead. You will now be able to add the MMSC Domain to http://www.zaksenterprises.com/humpa_mms/send.php
Samsung a930
1. Start on the Main Screen itself.
2. Press: Message
3. Press: Settings
4. Press: 3. PIX-FLIX Msg
5. Press: *
6. Enter Lock Code: 930667
7. From here you can change: the MMSC Domain to http://www.zaksenterprises.com/humpa_mms/send.php
Samsung a950
1. Access your "Messaging" main menu.
2. Select "Settings" then press the "*" key.
3. Enter the lock code 950667.
From here you can change: the MMSC Domain to http://www.zaksenterprises.com/humpa_mms/send.php
Nokia
1. Go to Menu>Messages>Options>Settings>Multimedia Message>Access Point in Use
2. Then simply create a new AP and enter the url to http://www.zaksenterprises.com/humpa_mms/send.php under Homepage
BenQ-Seimens EL71
1. Go to Menu>Messages>Settings>MMS>Connec.
2. sett>MMS Profiles>
3. Go to next available blank profile>Profile Name:ZaksEnt
4. Server URL:http://www.zaksenterprises.com/humpa_mms/send.php
Nokia 6265i on US Cellular
On the phone press *#MMS# and enter http://www.zaksenterprises.com/humpa_mms/send.php as the Multimedia Center Server and mobilenumber@zaksenterprises.com as the Album address.
US Cellular does not charge for incoming messages, so by using your service MMS is totally free.
Submitted by Steve
Samsung U740
If you registered for the free Wap service and your acct. has been activated then you can do the following to send free txt and pix messages.
Note: You will have to send messages to the persons full address for now on: ie: phonenumber@carrier. Look at the top of the MMS Setup for carrier MMS addresses.
Also, Text and Pix messages sent to you will still go through your carrier and you will have to pay for them unless you have a plan and then they will be deducted from your allowance.
Step 1: From the phones main screen press the softkey for message (given if you haven't reassigned the shortcuts).
Step 2: Press the softkey below settings.
Step 3: Scroll down to option 3 "Picture-Video Message" and press "OK".
Step 4: Once you are in the "PIC-VIDEO MESSAGE SETTINGS" menu press the "*" key on your phone.
Step 5: You should be prompted with a "Lock Code" screen asking you for a password, input "740667" and this will take you to the "MMS Provisioning" menu.
Step 6: Go into the MMSC Domain and change it to: http://www.zaksenterprises.com/humpa_mms/send.php
Have fun and enjoy!!
As a side note... After adding the above settings you will also be able to send pics/videos via pixplace. They will then be automatically uploaded into your profile gallery and there is where you can set them for public viewing.
If you need to change the settings back to the default Verizon settings= http://mms.vtext.com/servlets/mms.
Submitted by Jason(b&w_yamaha) Edited by Mike(Etrit)
Audiovox CDM-9900
power phone on and wait for the beep.
Enter "2 8 9 {press top left soft key} #1
then scroll to the mms settings
EMS/MMS/SMS Settings menu under nam programming
The Security code is mmsvzw (667899)
