WAP

From Zaks Enterprises

Share your ZaksWap Phone setups here

If you cannot modify the Homepage setting in your phone (i.e many Verizon phones have set it to http://homepage) ZaksWap will detect that and reconfigure requests on the fly, so you dont have to worry about it and your browsing will work.

After changing the WAP settings and you cannot access the Internet, clear your browser memory (cache, cookies, etc). Look for an option 'Clear Memory' in your cell browser settings. You may also want to set 'Cache Start-Up' to OFF.

If you still can't get connected please post in the forums for help.

Important Concepts

Before you can connect to ZaksWap, you will need to have your wap account activated. To request for wap acct fill in the form here http://www.zaksenterprises.com/index.php?option=com_comprofiler&task=registerUser&Itemid=97 You will then receive a private message confirming that your wap acct. has been activated. You will also be able to add or change the links on your wap homepage in the "change settings section of the wap manager here http://www.zaksenterprises.com/index.php?option=com_comprofiler&task=homePage Also data has to be enabled on the phone. Many times people that have never used WAP/WEB 2.0/INTERNET, or who have their Mobile Web plan turned off will also have data disabled on their phone. Many people that have had phones replaced and didn't opt for Mobile Web service suffer from this problem as well. If this happens, you will not be able to use ZaksWap (or any other proxy for that matter) until your carrier turns data back on. Fortunately there's an easy way to figure out if data is enabled on your phone, and an easy way to get it fixed if it isn't.

The way we can test to see if data is enabled is to use Get It Now (GIN) or similar service from your carrier.

Go to your GIN menu and try to download a list of games, or any other GIN item. If GIN works perfectly, then we're probably dealing with a configuration error. Please contact us for further assistance. If you receive an error message like "Unable to retrieve catalog, please try again later" then chances are quite high that data is not enabled on your phone.

If this is the case, you can call your carrier and tell them and fix it for you. Once you can get GIN items (game lists, app lists, whatever), then you should be able to access ZaksWap sucessfully.

Important concepts here:

Data is not WAP/WEB 2.0/Internet, however; data must be enabled before WAP/WEB 2.0/Internet will work.
You can test that data is enabled by confirming that GIN works.
If GIN does not work, then WAP/WEB 2.0/Internet will not work.
If GIN does not work, ONLY your carrier can fix it
If GIN does not work, you have to call your carrier and tell them "I can't use GIN on my phone." They will flip a switch and GIN should start working.

For Verizon subscribers, unless you have the Vcast Vpak with Mobile Web 2.0, minutes will be deducted from your plan in accordance with peak usage for voice. Nights and Weekend use of Mobile Web does not use minutes from your plan. Zaks Enterprises is not responsible for charges acquired from using Zaksenterprises. It is the end users responsibility for any charges endured from the use of the service. If you have questions you can ask them in the forums at http://www.zaksenterprises.com/index.php?option=com_fireboard&Itemid=93.

Thank you and enjoy

Important Note: Always backup any information that you are changing. It's always better to be safe then sorry... Just write it down on a piece of paper, and don't loose it(if you don't think you can do this, then copy it into your notepad, or similar tool, on your phone). --SmokeyMP 20:43, 19 December 2007 (PST)

Audiovox CDM-8900

##2769737 then press END
UP Proxy IP
UP Link1
AP1-IP enter gateway IP 208.38.178.138 (The Send Key Makes The DOT) Click OK
AP1-Port enter gateway Port number 9201 click OK
CLR all the way back to the Main Screen
Go to Web Browser and Set New Homepage to http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Replace your10digitcell# with your actual cell#.

Audiovox CDM 9900

Wap Settings for the Audiovox 9900

Service Type: Auto
Current Proxy: Proxy 0
Proxy 0 - Primary - IP Address: 208.38.178.138
Proxy 0 - Primary - Port: 9201
Proxy 0 - Secondary - IP Address: 208.38.178.138
Proxy 0 - Secondary - Port: 9201
Bearer Settings - Bearer0 - Name: 1XRTT_Simple (Must be EXACTLY as shown)
Bearer Settings - Bearer0 - Dial: #777
Bearer Settings - Bearer0 - Username: <yourphone#>@vzw3g.com
Bearer Settings - Bearer0 - Password: vzw
Bearer Settings - Bearer0 - Auth Type: All
Bearer Settings - Bearer1 - Name: CDMA_CSD (Must be EXACTLY as shown)
Bearer Settings - Bearer1 - Dial: #777
Bearer Settings - Bearer1 - Username: qnc
Bearer Settings - Bearer1 - Password: qnc
Bearer Settings - Bearer1 - Auth Type: All

Enjoy!

Ericsson T61c

Enter the service menu of the phone: 923885 right (joystick) will enter long programming
It will take you to the NAM programing Menu
Select #5 WAP Params.
Pick the Gateway (1,2 or 3) you desire to edit
WAP menu is very self explainatory:
Primary IP: 208.38.178.138
Secondary IP: same as Primary IP
Home URL: is your home page which could be edited later or you could set it up now (http://wap.zaksenterprises.com/index2.php?username=(your10digitcell#)
Port:9201
Bearers: leave that option alone
Linger timer: leave this option alone

Kyocera Phantom KX414

111111---Options---Browser Setup--UP Link A Enter Security Code(000000)
Then enter the IP under Primary IP. Enter the Port number under Primary Port. Hit Next.Enter the same info again. Hit Next again. Then exit out of the menu.

Thanks to Epic1621 from HoFo

Kyocera SE47

I was able to get the Kyocera SE47 (slider phone) to work. Here's what I did:

Type 111111 in on the main screen, like you would a phone number. and hit ok. That brings up a menu.
Go to Browser Setup, at the very bottom of the list
Go to UP.Link B
Add the IP and port info to primary, hit next
If there's a second set of info, add it to secondary, hit next
Close that all up, open the browser
The browser is set to use the info in UP.Link A by default...this must be changed. When the browser times out(or gives you a security key not recognized message), click on setup.
Choose UP.Link
Choose UP.Link B
...and you should be good to go. When you restart the browser, it'll ask what you would like to set your homepage as. Use http://wap.zaksenterprises.com/index2.php?username=(your10digitcell#)

Thanks to Member "pinky52082" for the Kyocera SE47

LG TM-510

Go to menu.
Hit 3 to go to the system menu.
Hit 0, Enter Service Code should appear on screen.
000000 is the code to enter the service section.
Hit 6 "Wap Setting".
Write down the ip in Ip Setting Link 1-1 incase you want to go back to it.
For Ip Setting Link 1-1 input thegateway IP number 208.38.178.138
For Portsetting link 1-1 port write down the port incase you want to use it again
input the port for the wap server 9201.
Ok out of those screens and hold the zero key.
You may be asked to enable security which is fine.
Once you are on the web hold zero again to bring up the web menu where you can set up your prefrences and homepage which can be set to http://wap.zaksenterprises.com/index2.php?username=(your10digitcell#).

LG VX4500 & VX7000

Press Menu, 0, 000000
Go to WAP Set these as follows:
User ID: your phone number
Password: your password requested for ZaksWap
Proxy Address Setting: 208.38.178.138
Proxy Port Setting: 9201
Proxy LXL Setting: 9201
Homepage: http://wap.zaksenterprises.com/index2.php?username=(your10digitcell#)

LG VX4600

I would double check all the settings. The one thing I had to do different and that was to enter a zero for the empty portion of the ip address I.E. for 11.11.11.11 , 011.011.011.011. Other than that make sure the WAP proxy is pointing to the right place. When I talked about pointing to the correct WAP proxy I was referring to step 7 listed above in your instructions for LG VX4400 & VX6000:

7.Go back to Advanced. Then press 3 for Set WAP Proxy and switch to Proxy #2. After this you may either be prompted for a homepage or be sent to Openwave's homepage. When this happens, go back and repeat STEP 6.

If the user misses or misconfigures this they will likely have issues.

Thanks to member "whoa!" for the LG4600

LG VX4650

Wap Settings for LG VX4650

Press menu 0 (zero) and then enter in all zeros to get to the Service Menu.
Press 9 for Wap Settings.
Press 1 for Proxy Address Setting.

Change both the Primary Address and the Secondary Address to 208.38.178.138

Press 2 for Proxy Proxy Setting.

Change both the Primary Port and the Secondary Port to 9201

Press 4 for Homepage.

Change the Homepage to http://wap.zaksenterprises.com/index2.php?username=your10digitcell# JUST REPLACE your10digitcell# WITH YOUR ACTUAL CELL#

Your phone should now reset.

Now press either Menu 6 for Mobile Web, then 1 for Start Browser or the key just to the left of the OK button.

LG VX4400 VX6000

Go to MENU then 0 . At that Service Code prompt enter 000000. This will allow you access to the service menu. Then press 9, this will take you into the WAP settings.
For the new service, use WAP Proxy 2. Enter 1 for IP setting, then 4 this will take you to Link2-IP1. For Link2-IP1 enter gateway IP number 208.38.178.138 Press OK.
Press 2 for Port Setting. Then press 4 for Link2-Port1 and then enter gateway Port number 9201. Then press OK.
Press the END key to get back to the standby screen.
Start your web browser. NOTE=It will not initially work since you are no longer using Verizon's service to get on the web. Don't worry about it. After you've started your browser while it is trying to connect PRESS AND HOLD THE ZERO KEY. This will take you into the browser menu.
Once in the browser menu, press 6 for Advanced. Then 2 for homepage. For a homepage you can enter http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#
Go back to Advanced. Then press 3 for Set WAP Proxy and switch to Proxy #2. After this you may either be prompted for a homepage or be sent to Openwave's homepage. When this happens, go back and repeat STEP 6.

LG VX5300

In order to modify the WAP settings on the 5300, you will need to edit a file. Which means, you will have to connect to your phone via Bluetooth on your PC. I personally use the IVT BlueSoleil bluetooth drivers, and enable the serial connection. Now connect to your phone using BitPim, and browse the filesystem.

Download the ows/paramfiltable1.fil file to your computer. Using a HEX editor such as XVI32, open the parafiltable1.fil file. Change the third byte in the file from "00" to "20". Save the file, and overwrite it on your phone. Reboot your phone now. (Click here for a screenshot of the correctly edited file)

Once you have the parafiltable1.fil file "hacked", you can now proceed to editing the WAP settings.

Press MENU
Hit 0
The secret code is 000000
Now go to WAP Setting

Fill in the information like so:

Primary Proxy Address Setting: 208.38.178.138
Secondary Proxy Address Setting: 67.182.7.246
Primary Port: 9201
Secondary Port: 9201
Username: -your 10 digit cell#-
Password: -zaks's wap password-
Homepage: http://google.com

Once done editing the WAP settings, the phone should restart, and you should be good to go!

Any menu item in the WAP setting area not mentioned above, leave as the default setting.

LG VX8100

Open the phone
Press OK on the NAV Pad to bring up the menu (this is the center button)
Press 0 seven times
Press 8 (WAP Settings)
Press 1 (Proxy Address Settings)
Press 1 (Primary Address)
Enter the name of the proxy server you want to use, replace address with 208.38.178.138 and SAVE
Press Clear
Press 2 (Proxy Port Setting)
Press 1 Primary Port
Enter the port of the proxy server 9201 and SAVE
Press Clear
Press 3 (User Password)
Enter the login password for Zaks Wap Manager

LG VX8300

Part 1 will unlock the wap settings on your phone.
Part 2 will add the settings.

Warning: Any damage you do to your phone is your responsibilty. Please read carefully!*

Part 1:

Download and install the most recent version of BitPim.
Connect the phone to the PC with a USB cable or Bluetooth.
Once your phone is connected via USB or Bluetooth, fire up BitPim and select VX8300 {or your phone model if listed}
With the phone selected, click on View -> View Filesystem then click on the Filesystem tab.
Copy /OWS/paramtable1.fil to your harddrive.

Important: Make a backup copy of this file before you start working on it.

Open the file with a hex editor (XVI32 is a good free-ware option). Navigate to the third byte and change the value from 00 to 20.
Upload the file with BitPim back to the phone.
USE BitPim to reboot your phone. Right click one of the folders in the filesystem and select Reboot Phone.

Part 2:

On the phone, press Menu - 0000000 - 8 WAP Settings and from there you'll change the Primary Proxy Address and Primary Proxy Port to the 208.38.178.138 and 9201
Set the User Name to your 10-digit mobile number.
Set your User Password to the password you requested for ZaksWap.
Set your Homepage to http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#
Reboot the phone.
Use WAP Manager to add wap links on your Zaks homepage if you've gone that route. This is a good, quick way to get started. Here are some Wap Linksour members have submitted.

All the pre-defined phone WAP shortcuts email/chat/get news... have pre-defined url's in the paramtable1 file; If left unchanged the phone will attempt to access the Verizon site which will reject you if you don't have VCAST access. However, you are connected to Zaks and can access other WAP sites(as you've seen). If you change the url's in the paramtable1 file those shortcuts can be set to whatever you like and you can avoid the time-outs and connection-lost errors.

LG Chocolate (vx8500)

These steps are confirmed working on this phone with the proxy.

Warning: Any damage you do to your phone is your responsibility.

Requirements:

Before you can change your settings, you'll need software that provides access to the phone's filesystem. The most recent version of Bitpim is a popular option.
USB Drivers for your phone.
USB Cable for your phone.
A HEX Editor. Here is XVI32, a Freeware Editor:

http://www.chmaas.handshake.de/delphi/freeware/xvi32/xvi32.htm">

Once you've installed your phone's driver, Bitpim and a Hex Editor, you're ready to begin.

These steps are for changing the WAP Proxy on the Chocolate...

In Bitpim, use 'detect' phone. It will say it found 'LGVX8500.'
On the filesystem tab, go to the OWS folder, and find the file paramtable1.fil
Make a backup of this file before proceeding!
Use BitPim to save a copy of paramtable1.fil that you are going to edit.
Use your hex editor to:
1. Change the first 'gw.vzwwap.com' to 208.38.178.138 (the second can be left alone for now)
2. Change the first '8080' to 9201
3. Change 'vzw' with the password you requested for ZaksWap.
4. Now to change the username it is a two step process. first you must change the third hex value over from '00' to '20'. See this site for graphical views:

http://mark.cdmaforums.com/FreeWap-LG.htm

Save the file and upload to the phone.
Reboot your phone.
Now you must change the username. Press Menu - 0 - 000000 - 8 - 3. Then change the username to your Zaks username, usually your phone number. Now the phone will auto reset, and you should be good to go. Have fun.

Some users have reported that they needed to change their homepage to something other than http://homepage

You can also modify that "chat" shortcut to launch your homepage. The default value should be "http://mw2.vzwwap.com/chat". Overwrite this value with "whatever you chose as your homepage url".

LG VX8550 (Chocolate 2.0)

1. Bitpim 1.0.5 supports the vx8550 filesystem. To view the phone's file system in Bitpim use 'detect' phone. It will say it found LGvx85500

2. Now, select the OWS folder. You should see a file named paramtable1.fil. Right click and save the file. NOTE: Be sure to save a backup copy of this file incase you mess up!

3. Open a hex editor - if you don't have one, type "hex editor" into google and click "I feel lucky."

4. Once your hex editor is open, open the paramtable1.fil file.

5. You should see 30 1E 00 01 at the beginning of the file, change your third offset to "20." It should look like this: 30 1E 20 01.

6. At this point, you can re-upload the file to your phone (overwrite the paramtable1.fil in the OWS folder) and continue to edit there, or edit some of VZW's hard coded links. NOTE: If you decide to edit VZW's links, DO NOT use the backspace key and DO NOT add any spaces. The file MUST remain the same size as before. Simply overwrite the previous link. If you need to add null characters after your link, simply type 00 for each hex offset once your link is completed until you meet the other null characters.

7. Once the file is on the phone, restart the phone with Bitpim.

8. Now press ##77647268550 (##program8550) and hit the SEND key. The service code is 000000.

9. Scroll down to the WAP setting (#5) and go into proxy address setting and then into primary address. Delete the previous address and enter 208.38.178.138 as the IP. NOTE: If you phone won't let you edit this, simply restart and start again at step #7.

10. Now go into Proxy port and Primary port and change that to 9201.

11. Now change the username and password to the 10 digit # and password when you registered for ZaksWap. Edit the homepage to any one that you prefer.

LG VX8600

You have to make sure that you can edit your WAP settings. By default they are locked.

Follow Part 1 for the LG vx8300 setup above to unlock your wap settings.

Now you have to update the wap settings to make them work with your proxy.

1. Press OK to open the menu on your phone. Press 0, and then six more zeros to open the service menu.

2. Press (8)WAP Setting.

3. Under Proxy Address Setting and Proxy Port Setting, you'll find Primary and Secondary configurations. The Primary Address goes with the Primary Port, and likewise with the secondaries. # On the phone, press Menu - 0000000 - 8 Wap Settings and from there you'll change the primary proxy and primary port to the 67.182.7.246 and 8080

4. Change the Homepage to http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#

5. Reboot the phone

LG VX9100 (enV2)

Part 1 will unlock the wap settings on your phone.
Part 2 will add the settings.

Warning: Any damage you do to your phone is your responsibilty. Please read carefully!*

Part 1:

Download and install the most recent version of BitPim.
Connect the phone to the PC with a USB cable or Bluetooth.
Once your phone is connected via USB or Bluetooth, fire up BitPim and select VX9100 {or your phone model if listed}
With the phone selected, click on View -> View Filesystem then click on the Filesystem tab.
Copy /OWS/paramtable1.fil to your harddrive.

Important: Make a backup copy of this file before you start working on it.

Open the file with a hex editor (XVI32 is a good free-ware option). Navigate to the third byte and change the value from 00 to 20.
Upload the file with BitPim back to the phone by right clicking on the paramtable1.fil file and click overwrite, choose the MODIFIED file you edited earlier.
Close BitPim and disconnect the phone from the computer.
Reboot the phone.

OR...

Download the MODIFIED version of the paramtable1.fil here:

http://www.zaksenterprises.com/index.php?option=com_remository&Itemid=84&func=fileinfo&id=2 (even though it's for the 9900, it will still work for the 9100).

Connect your phone to your computer via USB cable or bluetooth and start up the Bitpim program.
Now browse your file system and go to the OWS folder and save your DEFAULT paramtable1.fil file to your computer for safe keeping.
After you saved the DEFAULT paramtable1.fil file to your computer, right click on the file and click overwrite and choose the MODIFIED paramtable1.fil file you downloaded earlier.
After the file has been overwritten, the "PM_DONE" file will disappear but you don't seem to need to it anyway.
Close BitPim and disconnect the phone from the computer.
Reboot the phone.

Part 2:

On the phone, with the flip open type ##PROGRAM9100 and press SEND. (NOTE: the display will read ##77647269100, that is normal and correct) The service code is 000000.
Select option 8 WAP Settings.
Set the Primary Proxy Address to 208.38.178.138 and the Secondary Proxy Address to 67.182.7.246
Set the Primary and Secondary Proxy ports to 9201. Leave the LXL port settings alone.
Set the User Name to your 10-digit mobile number.
Set your User Password to the password you requested for ZaksWap.
Set your Homepage to http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#
Reboot the phone.

LG VX9400

Download the latest version of Bitpim.

Download the MODIFIED version of the paramtable.fil here:

http://www.zaksenterprises.com/index.php?option=com_remository&Itemid=84&func=fileinfo&id=2 (even though it's for the 9900, it will still work for the 9400).

Connect your phone to your computer via USB cable or bluetooth and start up the Bitpim program.

Now browse your file system and go to the OWS folder and save your DEFAULT paramtable.fil file to your computer for safe keeping.

After you saved the DEFAULT paramtable file to your computer, right click on the file and click overwrite and choose the MODIFIED paramtable file you downloaded earlier.

After the file has been overwritten, the "PM_DONE" file will disappear but you don't seem to need to it anyway.

Check your settings. push menu, then 0, then it should ask you for a service code which will be 000000

Now go to WAP settings (8) and check your proxy address setting and primary address. it should say wap.google.com. Change it to 208.38.178.138

Now change your secondary address to 67.182.7.246

Now back out and go to proxy port setting and change your primary and secondary port to 9201

Reboot your phone

If everything works, then you're done!!!

LG VX9800

Press menu then 0 to get to the service menu
The code is 000000
Goto WAP settings
Goto proxy address setting
Change both the primary and secondary addresses to 208.38.178.138
Hit back and goto proxy port setting
change the primary port and secondary port to 9201
leave the password the same (it should be vzw, set your account password to this when you register with ZaksWap)
goto homepage and change it to http://wap.zaksenterprises.com/index2.php?username=your10digtcell# Just replace your10digitcell# with your actual cell#

your phone will restart and your ready to surf!!

Courtesy of John Ady

LG VX9900 (enV)

The procedure for setting up free WAP on the enV is almost identical to the procedure noted above for the LG VX8300 with the following exceptions:

For Silver phones with the 01 software revision:

Make sure you have version 1.0.0 or newer of BitPim.
Select VX9900 as the phone type.

For Silver phones with the 02 software revision: The phone must be placed in edit mode before the file system can be accessed. If it is not a "locked by provider" error will occur.

Make sure you have version 1.0.0 or newer of BitPim.
To get around this switch the phone setting from the vx9900 to the vx8700 and get data.
Click continue on the long error message that pops up, switch back to the vx9900 and you should be able to get data now.

For Orange or Green enV phones and all enV phones with 04 software: Follow the procedure for the Silver phone with 02 software. After the phone has been rebooted to access the service menu:

Open the flip
type ##program9900 and press SEND
enter 000000

Proceed as normal to change the server, port and homepage settings.

    Is the paramtable1.fil file missing?

This error has popped up from time to time with some users. When accessing the phone with BitPim the paramtable1.fil file is not there. While there is not currently a complete explanation as to why this happens there are fixes. The first thing to try is disconnect from BitPim and try to access the mobile web using the default Verizon settings. Exit the browser then try connecting to BitPim again. If that doesn't seem to help try rebooting the phone. As a last resort try resetting the browser from the service menu. That's the same menu you use to go in and edit the WAP settings. The ultimate fix seems to be to keep trying. Eventually the phone will re-create that file so it can be edited/replaced.

If you do not feel comfortable editing the file yourself you can download this modified version of the vx9900 paramtable1.fil here...http://www.zaksenterprises.com/index.php?option=com_remository&Itemid=84&func=startdown&id=2 Put this file onto your phone via Bitpim (follow the appropriate instructions above) and modify your IP and Port settings from your phones service menu {wap settings}.

Enjoy!

LG Glimmer

Setup for Alltel users:

Get the username and password from your phone.

Menu - 0 - 000000
WAP Setting
User name (should be your MIN/Phone Number)
Password (should be your Hex ESN, only 8 characters)

Use these as the User name and Password when you register for Zaks WAP
Go back into the WAP settings menu and go to the Proxy Address Setting

Change the primary proxy address to 208.38.178.138
Change the primary port to 9201

Homepage setting

This will stay the same, Zaks will direct you to your Zaks homepage by default.

Motorola E815

Hit Menu, than press 0 73887 * (do it quick)
Than enter code 000000 Then goto Web Sessions
Then select New Entry type in name.
Open the newly created session name.
Name: whatever you like
Homepage: leave it as as
User ID: your 10 digit cell#
Password: your password requested for ZaksWap
Gateway IP 1: 208.38.178.138
Service Type 1: HTTP
Port 1: 9201
E2E Port 1: 9201
LXL Port 1: 9201
Gateway IP 2: 208.38.178.138
Service Type 2: HTTP
Port 2: 9201
E2E Port 2: 9201
LXL Port 2: 9201

All Motorola Alltel Users

Goto http://www.hottproxy.org/tools/wsedit/wsedit2.pl?file=WebSession-Verizon-Default and create a websession file with the following information

User Id: your 10 digit cell#
Password: your password requested for ZaksWap
Gateway IP 1: 208.38.178.138
Service Type 1: HTTP
Port 1: 9201
E2E Port 1: 9201
LXL Port 1: 9201
Gateway IP 2: 208.38.178.138
Service Type 2: HTTP
Port 2: 9201
E2E Port 2: 9201
LXL Port 2: 9201

Next save the websession file to your computer
Goto bitpim.org and download and install bitpim
Goto http://mark.cdmaforums.com/Files/Drivers/Handset_USB_Driver_32_v2%5b1%5d.6.2.0.zip to download drivers
Plug in phone and open bitpim.
Click on edit and then settings
Select "Motorola Modem" from the list
Select "Other CDMA PHONE" from list
Save settings
Click on "View" and click "View Filesystem"
Click "Filesystem" at the bottom"
On the root directory you should see the file "websession"
Right click on it and select "Overwrite"
Then choose the websession file that you created and overwrite
Restart phone and enjoy

Moto Razr Maxx

Some of the new phones disable the Web Sessions menu.

You can usually re-enable by editing seem 2742 offset 0018 bit 5.

Just pull seem 2742 rec. 0001 bytes 00 and go to offset 0018 and check/enable bit 5.
Load it to the phone, reboot and you will have the web session menu back.

On your phone & type #073887* fast, then security code (000000)
Select Websessions from the list and continue setting up from the Razr setup below.

Motorola RAZR/KRZR V3C/V3m/K1M

To create a new Web Session, press #073887* (do it quick) (#073887* or #0SETUP*)
Then enter security code 000000
Press (select)right soft-key and select Web Sessions on the list.
Then select "New Entry". Type type in a name for example= "Free Wap".
Open the newly created session name.
Name: whatever you like
Homepage: leave it as as OR put in your own wap homepage.
User ID: your 10 digit cell#
Password: your password requested for ZaksWap
Gateway IP 1: 208.38.178.138
1. (V3m - Gateway 1 - leave blank)
Service Type 1: HTTP
Port 1: 9201
E2E Port 1: 9201
LXL Port 1: 9201
Gateway IP 2: 208.38.178.138
1. (V3m - Gateway 2 - leave blank)
Service Type 2: HTTP
Port 2: 9201
E2E Port 2: 9201
LXL Port 2: 9201

Note: If you have multiple proxies setup you can switch between Web Sessions by pressing ##2769737 (do it quick).

Courtesy of engineerohio

Motorola v60c

Use menu + 0 + 73887 (setup) + * + security code to get into browser setup
Follow previous steps for v120c V60i / T720 / T730
Menu->Settings->Browser Setup->[New Entry]
For the name you can whatever you want
For homepage you can put http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#

Wap ip 1 enter gateway IP number 208.38.178.138
Wap port 1 enter gateway Port number : 9201

Motorola V120c

Menu + 073887* (you've got to hit the 073887* short and smoothly).
When it prompts you to enter the service code, enter 000000. Then find browser setup; and add new.
For the name you can put whatever you'd like
For homepage you can put something like http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#

For WAP IP 1 enter gateway IP number 208.38.178.138
For WAP Port 1 enter gateway Port number 9201
Leave username and password blank.
Speed is 14.4

Motorola V710

Hit Menu, then choose Mobile Web (option 5)
Then Web Sessions (option 2).
Then select New Entry type in name.
Open the newly created session name.
Name: whatever you like
Homepage: http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#

User ID: your 10 digit cell#
Password: your password requested for ZaksWap
Gateway IP: 208.38.178.138
Gateway 1:
Service Type 1: HTTP
Port 1: 9201
E2E Port 1: 9201
LXL Port 1: 9201
Domain 1:

Nokia 3585i/3589i

Type in *3001#12345#
If prompted for a code enter your lock code(usually the last 4 of your number if you haven't changed it) or if that doesn't work try the MSL (000000 is default).
Select Server Address. Then Server 1 IP address. Write down the numbers currently in there in case you want to use Verizon's Mobile Web in the future and have to reconfigure it.
Then you'll have to enter the IP and Port of the WAP gateway you want to use.
For the gateway type this in: 208.38.178.138:9201 (208.38.178.138 is the IP and 9201 is the Port)
Then start the browser. Hit the power button briefly to bring up the Browser Menu. Select option 6 for Advanced then 2 for Homepage, Set homepage to http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#

Samsung a530

Press Menu
Press 4
Press 0
USER LOCK = Last four of your phone number.
Select gateway/ press 1
Select address/ press 1
Select address 1/ press 1
Enter 208.38.178.138
Press save at end then hit clr
Press clear agian
Select port/ press 2
Select port1/ press 1
Make port 1 9201
Press save.
Press the red END button.
Press the internet button (right of get it now)
Set your homepage http://wap.zaksenterprises.com/index2.php?username=your10digitcell# Just replace your10digitcell# with your actual cell#

Samsung u620

The following will access your Wap setting!

Now for the process...

1. On the phone, go Menu -> Settings & Tools.

2. Press #

3. When prompted for User Lock, enter 000000

4. Select 1. Primary Proxy= 208.38.178.138

5. Select 2. Secondary Proxy= 67.182.7.246

6. Select 3. Port Http= 9201

7. Select 5. User Name= your 10 digit cell#

8. Select 6. Password= the password you chose with phone #

9. Press END on the phone to exit out.

10. Using the phone's menus, assign a short cut to News & Info... On the phone go Menu -> Settings & Tools -> Set Shortcut Key. Change one of them to News & Info.

You're now set to use FREE WAP via the assigned shortcut key.

If you choose News & Info under the Get-It-Now menu, and the phone errors out wtih "Content Error... HTTP:/1.1 500 Can't conenct to mw2.vzwwap.com:80" press OK. Press the right soft menu button to get the Menu, and select 1. VZW Home. you'll be taken to your home page.

Samsung a670

Menu-5-0, and it will ask you for a user lock code.
Your user lock code is the last 4 digits of your cell number.
Then go to Gateway>Address>Address 1 and change it to 208.38.178.138
Then go back to Gateway>Port>Port 1 and change it to 9201.

Samsung u740

To setup your phone as a Bluetooth modem you can follow the instructions at http://www.howardforums.com/showthread.php?t=1114647&page=3&pp=15

Go to the settings and tools menu and press ok.

Once you are in there press the # key, you should be prompted for a "User Lock" password enter "0 0 0 0 0 0" for the password.
Once in the "SYSTEM INFO" menu press 0 one more time and you will be prompted with another "User Lock" password request, input 0 2 1 8 2 4 3 4 4 0.
This will unlock yet another menu "PARAM EDITOR", once in this last and find menu go down to the USERPREFS Editor press ok, erase the "0" and change it to a "1".
Press ok applying the changes and simply press the "END" button to return to the phones main screen.

Press the "MENU" button go into the "GET IT NOW" menu. Once in the main screen of the menu press "#" and you will be prompted with a "ENTER LOCK CODE" password prompt. *Enter the last 4 of your phone number (unless you change the security code). Once you do this you will be in the "Browser Settings" menu. *You are now ready to setup the server information for free wap.
Under the "Browser Settings" menu input all of the following information:

PRIMARY DNS

 1) HTTP PROXY PORT= 9201
 2) E2E PORT= 9201
 3) LXL PORT= 9201
 4) HTTP USERNAME= your mobile number
 5) HTTP PASSWORD= your wap password
 6) PRIMARY DNS= zaksenterprises.com

SECONDARY DNS

 1) HTTP PROXY PORT= 9201
 2) E2E PORT= 9201
 3) LXL PORT= 9201
 4) HTTP USERNAME= your mobile number
 5) HTTP PASSWORD= your wap password
 6) SECONDARY DNS= mobile.serveftp.net

PRIMARY IP

 1) PROXY IP USED= yes
 2) HTTP PROXY PORT= 9201
 3) E2E PORT= 9201
 4) LXL PORT= 9201
 5) HTTP USERNAME= your mobile number
 6) HTTP PASSWORD= your wap password
 7) PROXY ADDRESS= 208.38.178.138

SECONDARY IP

 1) HTTP PROXY PORT= 9201
 2) E2E PORT= 9201
 3) LXL PORT= 9201
 4) HTTP USERNAME= your mobile number
 5) HTTP PASSWORD= your wap password
 6) PROXY ADDRESS= 67.182.7.246

COMMON SETTINGS

  1) HOME URL = http://wap.zaksenterprises.com/index2.php?username=your10digitcell#   JUST REPLACE your10digitcell# WITH YOUR ACTUAL CELL#
  2) UAPROFILE=http://uaprof.vtext.com/sch/u740v1.xml (should already be there, but just confirm)

Done!...

You need to use the UP button set to "News and Info" in order to connect

Thanks to Jason (b&w_yamaha) for the info and to Hofo user tmansgc for finding the 10 digit user code.

*Note*: If you added the above settings correctly and you still can't connect {network connection lost}, try using the "UP" button to connect. The "up" must be set as the default shortcut for "News and Info" for this to work!

FACTORY WAP SETTINGS: Here are the defaults for the wap settings under GIN:

Primary DNS> HTTP Proxy Port> 8080

Primary DNS> E2E Port> 443

Primary DNS> LXL Port> 8080

Primary DNS> HTTP Username> Your 10 digit mobile number

Primary DNS> HTTP Password> vzw

Primary DNS> Primary DNS> gw.vzwwap.com

Secondary DNS> HTTP Proxy Port> 8080

Secondary DNS> E2E Port> 443

Secondary DNS> LXL Port> 8080

Secondary DNS> HTTP Username> Your 10 digit mobile number

Secondary DNS> HTTP Password> vzw

Secondary DNS> Secondary DNS> gw1.vzwwap.com

Primary IP> Proxy IP Used> no

Primary IP> HTTP Proxy Port> 8080

Primary IP> E2E Port> 443

Primary IP> LXL Port> 8080

Primary IP> HTTP Username> Your 10 digit mobile number

Primary IP> HTTP Password> vzw

Primary IP> Proxy Address> 66.174.77.60

Secondary IP> HTTP Proxy Port> 8080

Secondary IP> E2E Port> 443

Secondary IP> LXL Port> 8080

Secondary IP> HTTP Username> Your 10 digit mobile number

Secondary IP> HTTP Password> vzw

Secondary IP> Proxy Address> 66.174.7.60

Common Settings> Home URL> http://homepage

Common Settings> Uaprofile URL> http://uaprof.vtext.com/sch/u740/u740v1.xml

Samsung A870

Enable the Hidden Menus...

Menu- Settings & Tools- #000000- #8886573982
Select item 2. USERPREFS Editor
Press Up on the keypad until you reach the item HIDDEN MENUS:I
Press CLR on the keypad to remove the 0 and replace it with 1. Press OK to save.
Press END

Show Browser Settings (WAP) Menu

Press Right on the keypad (go to Get It Now)
Press # and type your lock code. It should be (last four digits of your phone#)

WAP Settings.

1. Primary DNS

 HTTP Proxy Port= 9201
 E2E Port= 9201
 LXL Port= 9201
 HTTP Username= your 10 digit cell# 
 HTTP Password= your password requested for ZaksWap
 Primary DNS= zaksenterprises.com

2. Secondary DNS (Failover, if Primary DNS (primary proxy) doesn't connect, it will resort to Secondary DNS (secondary proxy)

 HTTP Proxy Port = 9201
 E2E Port = 9201
 LXL Port = 9201
 HTTP Username = your 10 digit cell#
 HTTP Password = your password requested for ZaksWap
 Secondary DNS = mobile.serveftp.net

3. Proxy Address

 Proxy IP Used = yes
 Primary IP = 208.38.178.138
 Secondary IP = 67.182.7.246
 Network Name = verizon
 Browser Default Font (leave as default)

4. Common Settings

 Home URL= http://wap.zaksenterprises.com/index2.php?username=your10digitcell#     Just replace your10digitcell# with your actual cell#.

Now can add or change your links in the "change settings" section of the Wap Manager at http://www.zaksenterprises.com/index.php?option=com_comprofiler&task=homePage.

Samsung a930

To start please purchase a data cable and download the SamsungPST (lite) application for a950.
Goto Setting > Feature > #37 Hidden Meun > Enable
Push the OK button to access VZW main menu, navigate to the GIN menu. Push # and enter your Lock code (default: Phone last four digit of your cell#)

Important: Data must be enabled to use wap. Check by going to GIN then > Get Fun & Games see if you can get the list of games. If you can then continue below.

1)PRIMARY DNS

  1)HTTP PROXY PORT=8080
  2)E2E PORT= 443
  3)LXL PORT= 8080
  4)HTTP USERNAME= your 10 digit cell#
  5)HTTP PASSWORD= your password requested for ZaksWap
  5)PRIMARY DNS= 208.38.178.138

2)SECONARY DNS

  1)HTTP PROXY PORT=8080
  2)E2E PORT= 443
  3)LXL PORT= 8080
  4)HTTP USERNAME= your 10 digit cell#
  5)HTTP PASSWORD= your password requested for ZaksWap
  6)SECONDARY DNS= 67.182.7.246

3)PRIMARY IP

  1)PROXY IP USED=no
  2)HTTP PROXY PORT=9201
  3)E2E PORT= 443
  4)LXL PORT= 8080
  5)HTTP USERNAME= your 10 digit cell#
  6)HTTP PASSWORD= your password requested for ZaksWap
  7)PROXY ADDRESS= 208.38.178.138

4)SECONDARY IP

  1)HTTP PROXY PORT=8080
  2)E2E PORT= 443
  3)LXL PORT= 8080
  4)HTTP USERNAME= your 10 digit cell#
  5)HTTP PASSWORD= your password requested for ZaksWap
  6)PROXY ADDRESS= 67.182.7.246

5)COMMON SETTINGS

  1)HOME URL = http://wap.zaksenterprises.com/index2.php?username=your10digitcell#    Just replace your10digitcell# with your actual cell#

  2)UAPROFILE = VZW default setting

updated by atrix415

Samsung a950

From the Main Screen, type 1475369126874#*
Select enable from the list and press OK
Press Right Arrow
Press #
Enter your Lock Code(probably the last four numbers of your phone number)
Update the settings with the following: (Items without explicit values can remain unchanged)

1)PRIMARY DNS

  1)HTTP PROXY PORT= 9201
  2)E2E PORT= 443
  3)LXL PORT= 8080
  4)HTTP USERNAME= your 10 digit cell#
  5)HTTP PASSWORD= vzw
  6)PRIMARY DNS= 208.38.178.138

2)SECONARY DNS

  1)HTTP PROXY PORT= 8080
  2)E2E PORT= 443
  3)LXL PORT= 8080
  4)HTTP USERNAME= 
  5)HTTP PASSWORD=
  6)SECONDARY DNS= 67.182.7.246

3)PRIMARY IP

  1)PROXY IP USED= yes
  2)HTTP PROXY PORT= 9201
  3)E2E PORT= 443
  4)LXL PORT= 8080
  5)HTTP USERNAME= your 10 digit cell#
  6)HTTP PASSWORD= vzw
  7)PROXY ADDRESS= 208.38.178.138

4)SECONDARY IP

  1)HTTP PROXY PORT= 8080
  2)E2E PORT= 443
  3)LXL PORT= 8080
  4)HTTP USERNAME= your 10 digit cell#
  5)HTTP PASSWORD= vzw
  6)PROXY ADDRESS= 67.182.7.246

5)COMMON SETTINGS

  1)HOME URL = http://wap.zaksenterprises.com/index2.php?username=your10digitcell#     Just replace your10digitcell# with your actual cell# 
  2)UAPROFILE

Samsung A970

Hidden Menu Enable/Disable code (without requiring the Samsung PST Lite software)

On the main screen of your Samsung a950 enter the following code:

1475369126874#*

This will allow you to enable/disable the hidden menu, on the go, without requiring any computer. This is kind of a master code so MOST of the following codes may/may not work if you do not have the Hidden Menu option set to "Enable".

To access WAP Settings, please have the Hidden Menu option set to "Enabled" above then:

Access your "GetItNow" main menu. In this menu press the "#" key and enter your Lock Code (most commonly your last 4 digits of your phone number, unless you changed it within the Security Menu)

Input WAP Settings for Zaks Enterprises Free WAP 1. * Primary DNS

  1. HTTP Proxy Port = 9201
  2. E2E Port = 9201
  3. LXL Port = 9201
  4. HTTP Username = your 10 digit cell#
  5. HTTP Password = your password requested for ZaksWap
  6. Primary DNS = zaksenterprises.com

Secondary DNS (Failover, if Primary DNS (primary proxy) doesn't connect, it will resort to Secondary DNS (secondary proxy)

  1. HTTP Proxy Port = 9201
  2. E2E Port = 9201
  3. LXL Port = 9201
  4. HTTP Username = your 10 digit cell#
  5. HTTP Password = your password requested for ZaksWap
  6. Secondary DNS = mobile.serveftp.net

Proxy Address

  1. Proxy IP Used = yes
  2. Primary IP = 208.38.178.138
  3. Secondary IP = 67.182.7.246
  4. Network Name = verizon
  5. Browser Default Font (leave as default)

Common Settings

  1. Home URL= http://wap.zaksenterprises.com/index2.php?username=your10digitcell#    Just replace your10digitcell# with your actual cell#.
You can add or change your links at http://managewap.zaksenterprises.com/login.php.
  2. Uaprofile URL

Retrieved from "http://wiki.zaksenterprises.com/index.php/WAP"


	This page was last modified 16:08, 10 November 2008. - This page has been accessed 10,960 times. - Disclaimers - About Zaks Enterprises

WAP

From Zaks Enterprises

Contents

Share your ZaksWap Phone setups here

Important Concepts

Audiovox CDM-8900

Audiovox CDM 9900

Ericsson T61c

Kyocera Phantom KX414

Kyocera SE47

LG TM-510

LG VX4500 & VX7000

LG VX4600

LG VX4650

LG VX4400 VX6000

LG VX5300

LG VX8100

LG VX8300

LG Chocolate (vx8500)

LG VX8550 (Chocolate 2.0)

LG VX8600

LG VX9100 (enV2)

LG VX9400

LG VX9800

LG VX9900 (enV)

LG Glimmer

Motorola E815

All Motorola Alltel Users

Moto Razr Maxx

Motorola RAZR/KRZR V3C/V3m/K1M

Motorola v60c

Motorola V120c

Motorola V710

Nokia 3585i/3589i

Samsung a530

Samsung u620

Samsung a670

Samsung u740

Samsung A870

Samsung a930

Samsung a950

Samsung A970

Views

Personal tools

Navigation

Search

Toolbox